氢氧爆轰直接起始的射流点火方法研究

为探讨氢氧爆轰驱动激波风洞中的高氢混合比氢氧混合气直接爆轰的点火方法，对射流点火管的点火能力进行实验研究发现，点火管长度是决定射流点火能力的关键因素，射流点火能力随点火管长度的增加而增强。点火管与爆轰管之间无隔膜，结构简单，操作方便。同时观察了点火管中增添孔板对射流点火能力的影响，发现障碍物对射流点火能力具有减弱作用。     

线性多变量系统闭环特征结构的最优配置

本文利用特征结构配置法所揭示的线性多变量反馈控制系统闭环特征值和特征向量的配置自由度,求解具有二次型性能指标的控制系统设计问题,使得闭环系统在具有任意给定的希望特征值集合条件下,性能指标达到极小。文中建立了最优二次型性能指标与闭环特征结构的关系,提出了逐个优化特征向量的算法,这一算法概念直观并具有较高的运算效率,可以推广到一般的特征结构优化问题。     

CAPP系统中特征造型描述法的应用

本文结合专为哈尔滨制氧机厂开发的实用型CAPP系统，对CAPP系统的研制进行了探索性的研究，该系统以Windows作为开发平台，在基于零件特征造型建模的基础上，运用面向对象编程技术完成了一个交互式信息输入子系统，实现了回转体零件CAPP系统的信息输入，这里主要介绍零件特征信息模型的建立与特征信息的数据结构。     

内喷管间隙宽度对线性塞式喷管性能的影响

为了了解内喷管间隙宽度对线性塞式喷管性能的影响，提出了对应着同一个内喷管的三种不同间隙宽度的塞锥。采用数值模拟的方法，得到了不同间隙宽度的线性塞式喷管在不同工况下的流场和性能。比较了不同间隙宽度对线性塞式喷管性能的影响，结果表明：增加内喷管间隙会增大线性塞式喷管的面积比和设计压比；内喷管间隙变宽，塞锥表面的压强下降，塞式喷管的性能下降，间隙宽度增大一倍，塞式喷管性能下降1％～3％。另外在计算过程中发现，内喷管的性能是整个线性塞式喷管性能的主要组成部分，占了整个塞式喷管性能的三分之二以上。     

How we will go to Mars

This article studies the efficiency of ejecting waste generated by the life support system (LSS) of a manned spacecraft to reduce initial mass on low earth orbit. The spacecraft is used for a long-duration interplanetary mission and is equipped with either a chemical or a nuclear-thermal propulsion system. For this study we simulate an optimal control problem for a given spacecraft maneuver. An impulsive approximation of the optimal interplanetary spacecraft trajectory is assumed, which allows us to reduce the general optimal control problem to hierarchic structure of 'outer' and 'inner' subproblems. This structure is analyzed using the Pontryagin's Maximum principle. Numerical results, illustrating the efficiency of waste ejection are shown for typical Earth-Mars transfer trajectories. This results confirm in theory that using a waste ejection system makes an early manned Mars mission possible without having to design and build new, advanced biological LSS.     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994–1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

复合材料壳体与喷管的卡环连接结构研究

较详细地对复合材料壳体与喷管卡环连接结构进行了有限元应力,应变分析,对卡环,接头及倒锥等多体接触问题进行研究;对“Ｉ”型及“Ｌ”型卡环结构分别进行了计算和比较,并给出计算结果及结果分析。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

航天测控与数传接收综合信道构想

提出 S/ X航天测控与数传接收综合信道的概念 ,对综合信道进行了设计 ,重点说明综合信道中伪码测距的实现方法。讨论设计测控系统和应用系统综合信道的三种方案 ,并进行了比较分析。     

劳（Lao）喷管扩张段优化设计的数值方法研究

本文建立了火箭发动机喷管扩张段优化设计（Lao喷管）的型面曲线近似作图法的数学模型，将作图法转化为等价的优化问题，并给出了优化问题解的迭代方法，最后采用泛函网络的方法对离散的数值解进行了曲线拟合，以便于数控加工的编程。